Carbonylative synthesis and functionalization of indoles

• Alex De Salvo,
• Raffaella Mancuso and
• Xiao-Feng Wu

Beilstein J. Org. Chem. 2024, 20, 973–1000, doi:10.3762/bjoc.20.87

• the presence of Ni(dme)Cl2 (a nickel(II) chloride ethylene glycol dimethyl ether complex), dtbbpy (4,4-di-tert-butyl-2,2-dipyridyl), Zn(0) and ZnI2 in DMF at 120 °C [42] (Scheme 22). The nickel catalyst catalyzed the oxidative addition and CO insertion on aryl iodide compounds, while the Zn/ZnI2

Photoredox catalysis harvesting multiple photon or electrochemical energies

• Mattia Lepori,
• Simon Schmid and
• Joshua P. Barham

Beilstein J. Org. Chem. 2023, 19, 1055–1145, doi:10.3762/bjoc.19.81

• ). Notably, the protocol was also applicable to 4-iodotoluene as a moderately deactivated aryl iodide and the C(sp2)–I bond cleavage occurred chemoselectively in the presence of a C(sp2)–Br bond. N-Methylpyrrole and various other substituted pyrroles could be applied as trapping agents for electron-poor aryl

Construction of hexabenzocoronene-based chiral nanographenes

• Ranran Li,
• Di Wang,
• Shengtao Li and
• Peng An

Beilstein J. Org. Chem. 2023, 19, 736–751, doi:10.3762/bjoc.19.54

• synthesis started with the preparation of the distorted HBC analogue 49, bearing an aryl iodide for the subsequent Sonogashira cross-coupling reaction with alkyne 50 to give 51. The precursor 116 containing three pre-existing HBCs was synthesized through Co-catalyzed cyclotrimerization of compound 51

Strategies in the synthesis of dibenzo[b,f]heteropines

• David I. H. Maier,
• Barend C. B. Bezuidenhoudt and
• Charlene Marais

Beilstein J. Org. Chem. 2023, 19, 700–718, doi:10.3762/bjoc.19.51

• ] reported the synthesis of substituted dibenzo[b,f]azepines 110 as unexpected products during their investigation of the Catellani reaction. The Pd-catalysed reaction of an aryl iodide 106, bromoaniline 107, norbornadiene (108) and base resulted in the norbornene-azepine intermediate 109. Heating to 130 °C

Transition-metal-catalyzed domino reactions of strained bicyclic alkenes

• Austin Pounder,
• Eric Neufeld,
• Peter Myler and
• William Tam

Beilstein J. Org. Chem. 2023, 19, 487–540, doi:10.3762/bjoc.19.38

• active Cu(I) catalyst. The reaction was broadly successful with the steric and electronic nature of the aryl iodide having little effect on the reaction. Iron-catalyzed reactions Being the most earth-abundant d-block element, as well as orders of magnitude less expensive than other transition-metal

Redox-active molecules as organocatalysts for selective oxidative transformations – an unperceived organocatalysis field

• Elena R. Lopat’eva,
• Igor B. Krylov,
• Dmitry A. Lapshin and
• Alexander O. Terent’ev

Beilstein J. Org. Chem. 2022, 18, 1672–1695, doi:10.3762/bjoc.18.179

• following example of styrene diamination by a chiral aryl iodide, the higher efficiency of the proposed catalyst compared to simpler aryl iodides was attributed to the additional stabilization of the I(III) intermediate by chelation via n–σ* interactions and hydrogen bonding [147] (Scheme 33). The

• enantioselective hydroxylation of benzylic positions was achieved using a chiral aryl iodide mediator [148] (Scheme 34). At the first stage, under the action of m-CPBA and sodium bromide an active form of the catalyst ArI3-Br is formed, in which the iodine–bromine bond is cleaved homolytically under visible light

• chiral copper complex. An extraordinary example of an asymmetric difluorination of alkenes with the migration of aryl or methyl groups was shown using a chiral aryl iodide catalyst [149][150] (Scheme 35). Depending on the nature of the migrating group, two mechanisms are possible that determine the

A new route for the synthesis of 1-deazaguanine and 1-deazahypoxanthine

• Raphael Bereiter,
• Marco Oberlechner and
• Ronald Micura

Beilstein J. Org. Chem. 2022, 18, 1617–1624, doi:10.3762/bjoc.18.172

• intermediates. Here, we present a new tactic for the syntheses of 1-deazaguanine and 1-deazahypoxanthine stimulated by a recently published route of our research group for the corresponding nucleosides [16][17], employing the same key reaction, namely the copper-catalyzed coupling of an aryl iodide with benzyl

• be easily prepared from its commercially available 6-chloro derivative [16]. To enable C–O coupling with benzyl alcohol, protection of the N9 with a tetrahydropyranyl group was necessary due to limited solubility of the aryl iodide. Therefore, 6-iodo-1-deazapurine was treated with tosylic acid and

Simple synthesis of multi-halogenated alkenes from 2-bromo-2-chloro-1,1,1-trifluoroethane (halothane)

• Yukiko Karuo,
• Atsushi Tarui,
• Kazuyuki Sato,
• Kentaro Kawai and
• Masaaki Omote

Beilstein J. Org. Chem. 2022, 18, 1567–1574, doi:10.3762/bjoc.18.167

• 2n was 32% (Table 2, entry 13). In the case of aminophenol (3o), nucleophilic addition occurred predominantly at the phenoxide position and the product was obtained in moderate yield (Table 2, entry 14). An aryl iodide also participated in the reaction (Table 2, entry 15). We propose the reaction

Palladium-catalyzed solid-state borylation of aryl halides using mechanochemistry

• Koji Kubota,
• Emiru Baba,
• Tamae Seo,
• Tatsuo Ishiyama and
• Hajime Ito

Beilstein J. Org. Chem. 2022, 18, 855–862, doi:10.3762/bjoc.18.86

• yields are shown. The NMR yields are shown in parentheses. Reactions of solid aryl iodide and chloride. Reaction conditions: a mixture of 1 (0.30 mmol), 2 (0.36 mmol), KOAc (0.9 mmol), Pd(OAc)2 (0.006 mmol), t-Bu3·HBF4 (0.009 mmol), and H2O (60 μL) was milled in a 1.5 mL stainless-steel jar at 30 Hz

Recent developments and trends in the iron- and cobalt-catalyzed Sonogashira reactions

• Surendran Amrutha,
• Sankaran Radhika and
• Gopinathan Anilkumar

Beilstein J. Org. Chem. 2022, 18, 262–285, doi:10.3762/bjoc.18.31

• with XPhoS provided only 12% of the product. Both, Fe and Pd are essentially required for the successive coupling in nanocomposites, and hence iron composition plays a major role in the activity of the nanoparticles. Selective reaction between an aryl iodide/bromide with the terminal alkyne was facile

• lower in case of an ortho-substituted aryl iodide than the yields obtained from meta- and para-substituted aryl iodides. Kumar et al. reported a ferromagnetic α-Fe2O3-catalyzed coupling of phenylacetylene with aryl iodides (Scheme 12) [29]. They synthesized an azaindole-appended hexaphenylbenzene (HPB

• substituents like iodo, fluoro, methyl, acetyl, and methoxy groups. The yield of the coupling product was observed to be decreased when the steric demand of aryl iodide species increased as in the case of the naphthyl-substituted iodo derivative. An efficient method for the synthesis of 7-azaindole ring

Photoredox catalysis in nickel-catalyzed C–H functionalization

• Lusina Mantry,
• Rajaram Maayuri,
• Vikash Kumar and
• Parthasarathy Gandeepan

Beilstein J. Org. Chem. 2021, 17, 2209–2259, doi:10.3762/bjoc.17.143

• )‒H arylation as shown in Figure 3 [55]. Thus, the in situ-generated nickel(0) 3-IV undergoes an oxidative addition with the aryl iodide 2 to form the nickel(II)–aryl complex 3-V. The photoredox-generated nucleophilic α-amino radical 3-VIII readily combines with the nickel(II) species 3-V to generate

A recent overview on the synthesis of 1,4,5-trisubstituted 1,2,3-triazoles

• Pezhman Shiri,
• Ali Mohammad Amani and
• Thomas Mayer-Gall

Beilstein J. Org. Chem. 2021, 17, 1600–1628, doi:10.3762/bjoc.17.114

• bond functionalization reaction sequence with triazole-bearing aryl iodide 140, catalyzed by alloy-structured Pd/Cu bimetallic nanoparticles stabilized by a binaphthyl moiety, Pd/Cu-BNP 139. The Pd/Cu-BNP nanoparticles 139 were demonstrated to be an efficient and recyclable catalyst, and triazoles

Catalytic trifluoromethylation of iodoarenes by use of 2-trifluoromethylated benzimidazoline as trifluoromethylating reagent

• Tatsuhiro Uchikura,
• Nanami Kamiyama,
• Taisuke Ishikawa and
• Takahiko Akiyama

Beilstein J. Org. Chem. 2020, 16, 2442–2447, doi:10.3762/bjoc.16.198

• (I)–CF3 species, generated through the reaction of benzimidazoline 2 with CuI under basic conditions, underwent an oxidative addition reaction with the aryl iodide to generate a Cu(III) complex. A subsequent reductive elimination furnished the trifluoromethylarene and Cu(I). Because an electron

• synthesis. Experimental General procedure of trifluoromethylation: Aryl iodide 1 (0.1 mmol), 2 (56 mg, 0.2 mmol), CuI (3.8 mg, 0.02 mmol), 2,2’-bipyridyl (12.5 mg, 0.08 mmol), and potassium carbonate (55.6 mg, 0.4 mmol) were mixed in benzonitrile (1.0 mL), and the mixture heated to 90 °C. After 48 h

Palladium-catalyzed regio- and stereoselective synthesis of aryl and 3-indolyl-substituted 4-methylene-3,4-dihydroisoquinolin-1(2H)-ones

• Valeria Nori,
• Antonio Arcadi,
• Armando Carlone,
• Fabio Marinelli and
• Marco Chiarini

Beilstein J. Org. Chem. 2020, 16, 1084–1091, doi:10.3762/bjoc.16.95

• (Te), Italy 10.3762/bjoc.16.95 Abstract Cascade cyclocarbopalladation of the readily available aryl/alkyl-substituted propargylic amides containing an aryl iodide moiety, followed by Suzuki–Miyaura coupling with arylboronic acids, allowed an efficient regio- and stereoselective synthesis of

Synthesis and anticancer activity of bis(2-arylimidazo[1,2-a]pyridin-3-yl) selenides and diselenides: the copper-catalyzed tandem C–H selenation of 2-arylimidazo[1,2-a]pyridine with selenium

• Mio Matsumura,
• Tsutomu Takahashi,
• Hikari Yamauchi,
• Shunsuke Sakuma,
• Yukako Hayashi,
• Tadashi Hyodo,
• Tohru Obata,
• Kentaro Yamaguchi,
• Yasuyuki Fujiwara and
• Shuji Yasuike

Beilstein J. Org. Chem. 2020, 16, 1075–1083, doi:10.3762/bjoc.16.94

• -phenanthroline catalytic system [28]. Guo, Han, et al. reported a method that used a Cu(OAc)2/1,10-phenanthroline catalyst in the presence of KOH (2 equiv); this method replaced the aryl source from an arylboronic acid with an aryl iodide [30]. Zhou et al. reported the reactions of imidazopyridines, Se powder

Rhodium-catalyzed reductive carbonylation of aryl iodides to arylaldehydes with syngas

• Zhenghui Liu,
• Peng Wang,
• Zhenzhong Yan,
• Suqing Chen,
• Dongkun Yu,
• Xinhui Zhao and
• Tiancheng Mu

Beilstein J. Org. Chem. 2020, 16, 645–656, doi:10.3762/bjoc.16.61

• lower yields (21 61% and 22 60%). Also, iodobenzenes with an acetyl group in either ortho, meta, or para-position gave the products in satisfactory yields (23 79%, 24 81% and 25 87%). 1-Iodo-3,4-methylenedioxybenzene performed well providing aldehyde 26 with 92% yield. Aryl iodide with an acetamido

• corresponding aldehydes 36–42 were isolated with yields of 65−73%. Isotope labeling experiments Isotope labeling experiments were conducted to study the mechanism of the reductive carbonylation of aryl iodide with CO and H2 under our optimized conditions, using 13CO and D2 instead of CO and H2, respectively, as

• ]. First, RhCl3·3H2O reacted with PPh3 to form Rh(PPh3)3Cl (A), followed by an oxidative addition of Rh(PPh3)3Cl (A) to the aryl iodide, producing the corresponding arylrhodium complex (B). Then, the coordination and insertion of CO led to the formation of benzoylrhodium complex (C). Next, metathesis with

Recent advances in photocatalyzed reactions using well-defined copper(I) complexes

• Mingbing Zhong,
• Xavier Pannecoucke,
• Philippe Jubault and
• Thomas Poisson

Beilstein J. Org. Chem. 2020, 16, 451–481, doi:10.3762/bjoc.16.42

• corresponding aryl iodide. The aryl radical can then add to the allylating reagent, which, after tosyl radical elimination, provides the desired product. Finally, the active catalyst is regenerated thanks to the use of DIPEA as a sacrificial reductant. Note that this reaction was inefficient with aryl iodides

• , based on their findings, suggested the following mechanism: After irradiation under blue light, the excited [Cu(I)]* complex is reduced by the organic base DIPEA to produce a [Cu(0)] complex. The latter undergoes an SET with the aryl iodide to generate the radical anion from aryl iodide, which collapses

• moderate to good yields, and the functional group tolerance was excellent. Later in 2018, Evano and co-workers used their methodology to reduce aryl iodide for the synthesis of the alkaloids rosettacin, luotonin A, and deoxyvasicinone (Scheme 22) [37]. The developed strategy relied on the addition of an

Room-temperature Pd/Ag direct arylation enabled by a radical pathway

• Amy L. Mayhugh and
• Christine K. Luscombe

Beilstein J. Org. Chem. 2020, 16, 384–390, doi:10.3762/bjoc.16.36

• cycle. This type of mechanism has been previously proposed for aryl and alkene alkylations [27][28], but not for direct arylation systems. A possible mechanism is outlined in Scheme 3, informed by the previous reports [27][28][29][30]. The aryl iodide 4 undergoes SET with an excited palladium(0) species

Palladium-catalyzed Sonogashira coupling reactions in γ-valerolactone-based ionic liquids

• László Orha,
• József M. Tukacs,
• László Kollár and
• László T. Mika

Beilstein J. Org. Chem. 2019, 15, 2907–2913, doi:10.3762/bjoc.15.284

• catalytic system could be applied to various iodoarene substrates and the substrate reactivity was not influenced dramatically by the electronic parameters of the substituents. Both electron-withdrawing (chloro, fluoro and bromo) and electron-donating (methyl, methoxy) groups were tolerated on the aryl

• iodide (Table 3, entries 2–7). Under identical conditions, 2-iodothiophene, and iodopyridine derivatives could also easily be converted to the corresponding acetylene with good or even excellent isolated yields (3i–n). When 2-amino-3-iodopyridine (1i) was converted no C–N bond formation was detected

Thermal stability of N-heterocycle-stabilized iodanes – a systematic investigation

• Andreas Boelke,
• Yulia A. Vlasenko,
• Mekhman S. Yusubov,
• Boris J. Nachtsheim and
• Pavel S. Postnikov

Beilstein J. Org. Chem. 2019, 15, 2311–2318, doi:10.3762/bjoc.15.223

• cyclic (33) diaryliodonium salt. Pseudocyclic salt 25 was heated to 185 °C and the resulting oily residue was analyzed by GC–MS (Scheme 1a). Besides dearylation to aryl iodide 25a we observed the formation of an N-arylated product 25b in significant amounts. In a similar experiment compound 33 was heated

Recent advances on the transition-metal-catalyzed synthesis of imidazopyridines: an updated coverage

• Gagandeep Kour Reen,
• Ashok Kumar and
• Pratibha Sharma

Beilstein J. Org. Chem. 2019, 15, 1612–1704, doi:10.3762/bjoc.15.165

Multicomponent reactions (MCRs): a useful access to the synthesis of benzo-fused γ-lactams

• Edorta Martínez de Marigorta,
• Jesús M. de Los Santos,
• Ana M. Ochoa de Retana,
• Javier Vicario and
• Francisco Palacios

Beilstein J. Org. Chem. 2019, 15, 1065–1085, doi:10.3762/bjoc.15.104

• the authors to propose that the first stage of the reaction would be the insertion of carbon monoxide into the Ar–I bond to produce aryl iodide 107, followed by the reaction with the nitrogen nucleophile to form amide intermediate 108. Finally, intramolecular Michael addition would furnish lactam unit

• by a radical process promoted by UV irradiation, with an initial formation of aryl radical 116 from the corresponding aryl iodide 113 (Scheme 33). This radical would cyclize in an intramolecular 5-exo mode to furnish cyclic radical 117 which, in turn, can be caught by intermediate 118, formed by

• -diarylallylidene)oxindoles 132, respectively. Initially [114][115], using arylboronic acids 130 (R = Ar2), a variety of twenty-one diarylmethylene oxindoles 131 were obtained with good yields. When aryl iodide and arylboronic acids bearing different substituents are used, the expected stereochemistry of the

A novel and efficient synthesis of phenanthrene derivatives via palladium/norbornadiene-catalyzed domino one-pot reaction

• Yue Zhong,
• Wen-Yu Wu,
• Shao-Peng Yu,
• Tian-Yuan Fan,
• Hai-Tao Yu,
• Nian-Guang Li,
• Zhi-Hao Shi,
• Yu-Ping Tang and
• Jin-Ao Duan

Beilstein J. Org. Chem. 2019, 15, 291–298, doi:10.3762/bjoc.15.26

• conditions in hand (Table 1, entry 3), we expanded the aryl iodide substrates of this reaction (Scheme 2). As a result, it was found that both electron-deficient and electron-rich aryl iodides progressed well in the transformation, and the yield of relevant phenanthrene derivatives y-2–y-15 was quite well

• is presented in Scheme 5. As is commonly considered, the aryl-PdII complex A is formed by oxidative addition of aryl iodide to the Pd0 complex, which is followed by the insertion of norbornadiene to the C–Pd bond of A to produce B. Then, an ortho-C–H activation reaction occurs to B, which offers

• with aryl iodide (0.30 mmol, 1.0 equiv), ortho-bromobenzoyl chlorides (0.36 mmol, 1.2 equiv), norbornadiene (0.60 mmol, 2.0 equiv), Pd(OAc)2 (5 mol %), triphenylphosphine (12.5 mol %), Cs2CO3 (0.675 mmol, 2.25 equiv), and DMF (4 mL). The mixture was stirred at 105 °C under nitrogen atmosphere for 10 h

Cobalt- and rhodium-catalyzed carboxylation using carbon dioxide as the C1 source

• Tetsuaki Fujihara and
• Yasushi Tsuji

Beilstein J. Org. Chem. 2018, 14, 2435–2460, doi:10.3762/bjoc.14.221

• . Unsymmetrical internal alkynes bearing 4-Me2NC6H4 and 4-MeOC6H4 moieties (16f and 16g) afforded 17f-D, 17g-D, and 17g-Ar regioselectively after treatment with D2O or aryl iodide/Pd catalyst. A possible reaction mechanism for the carboxyzincation reaction is displayed in Scheme 17. First, the Co(II) precursor is

Recent advances in hypervalent iodine(III)-catalyzed functionalization of alkenes

• Xiang Li,
• Pinhong Chen and
• Guosheng Liu

Beilstein J. Org. Chem. 2018, 14, 1813–1825, doi:10.3762/bjoc.14.154

• high yields [61]. Recently, Jacobsen and co-workers reported the stereoselective synthesis of syn-β-fluoroaziridine building blocks via a chiral aryl iodide-catalyzed fluorination of allylic amines (Scheme 11) [62]. On the basis of their previous work, the C2-symmetric aryl iodide 31 as a catalyst was

• ratio of amines and HF was important for obtaining reasonable yields. Indeed, excellent 19F NMR yields albeit lower isolated yields were obtained in this reaction (Scheme 12). In an attempt to induce enantioselectivity, the chiral aryl iodide derivative 39 only gave a moderate enantioselectivity (22% ee

• ). Meantime, a similar work was independently reported by Jacobsen and co-workers, in which the reactive iodoarene difluoride could be in situ generated by oxidation of aryl iodide 40 with mCPBA [64]. The reaction showed a wide substrate scope, with toleration of terminal, internal alkenes as well as electron